The Borehole Drilling Service
Borehole drilling is a process used to access underground water reservoirs known as aquifers. These are naturally occurring sources of groundwater that have been continuously filled since the earth's formation.
They're ideal for people who have limited or no access to public supply of water and are also used by farmers, construction companies, businesses and other users of aquifers. There are many benefits to using boreholes as a water source, but it's important to make sure you get it right.
Drilling is a complex and technical procedure that needs to be done properly. Fortunately, there are professional well drilling contractors who are highly trained and experienced in finding groundwater and protecting aquifers.
The first step in bore holes drilling project is to perform a detailed site survey carried out by a hydrogeologist. This will determine where the water is located, what type of rocks and soil are necessary to be dug through to access it and what kind of equipment needs to be used. It will also help the hydrogeologist to get all the required approvals and permits.
Once this stage has been completed, the next step is to start the drilling. There are a number of ways to do this, including:
Percussion Sludging
This is the most popular type of drilling technique and is typically used for depths below 35 metres. This method uses a heavy bit tied to a cable that runs up and down the hole. As the bit is moved up and down, it causes rock to break. The loosened material is then removed with a bailer that has a no-return valve.
Rota Sludge
This method is less common than percussion sludging, but it can be more efficient when used in favourable conditions. It uses a wooden structure near the hole, which serves as a support for a lever mechanism that moves the drilling tool up and down the hole. Visit this website to get more info on the benefits of using boreholes as a water source.
It enables the operator to drill into hard and cracked ground, which is difficult for auger or air core drilling to penetrate. It can also be used for deep slanting holes.
A well casing is then installed to prevent the groundwater from contaminating the surface. A pumping system is then fitted to draw the water up from the aquifer.
The water that is pumped out of the well can be stored in a small storage tank. If the water is contaminated with dissolved minerals or other contaminants, SafeLane can install and test a treatment system to remove them from the water.
Once the water is filtered, it can be bottled for use. This allows people to have a convenient way to access fresh water when they're away from home or on holiday.
It's also a cost-effective alternative to public supply and reduces water bills by over 90%. It's a smart choice for anyone who wants to be in control of their water supply and save money at the same time. It's good to click on this site to learn more about the topic: https://en.wikipedia.org/wiki/Borehole.